4 × 4 × 4 box
volume, size & shipping weight

A 4 × 4 × 4 in box holds 64 cubic inches. This is 0.037 cubic feet, or 1 liters. In metric units, the box is 10.2 × 10.2 × 10.2 cm. All three sides have the same length. This box is a cube.

Cubic feet0.037 ft³
Cubic inches64 in³
Liters1 L
US gallons0.28 gal
Cubic meters0.001 m³
4 in4 in4 in
Drawn to scale · surface area 96 in² · space diagonal 6.9 in
Drawing

Dimensions of a 4x4x4 box

Figure 1 shows the box from the front, the top and the side, to scale. The front view shows the 4 in length and the 4 in height. The top view adds the 4 in width.

Front, top and side views of a 4 by 4 by 4 inch box, drawn to scaleTOPFRONTSIDELength 4 in (10.2 cm)Width 4 inHeight 4 in4 in
Figure 1. Front, top and side views of the 4 × 4 × 4 in box. All dimensions are inside dimensions.
DimensionInchesCentimetersMillimeters
Length4 in10.2 cm102 mm
Width4 in10.2 cm102 mm
Height4 in10.2 cm102 mm
PropertyValueUse
Volume64 in³ · 0.037 ft³The space inside the box.
Surface area96 in² · 0.67 ft²The board area of the six faces, without flaps or overlap.
Largest face16 in² (two ends)Put a label or a packing list on this face.
Space diagonal6.9 inThe longest straight item that fits, from one corner to the opposite corner.

NOTE: Box makers usually give the inside size. Carriers measure the outside: about 4 3/8 × 4 3/8 × 4 3/4 in for this box in C-flute board.

Dimensional weight

Dimensional weight of a 4x4x4 box

Carriers bill the larger of two weights: the actual weight and the dimensional (DIM) weight. To find the DIM weight, multiply the three sides. Then divide by the carrier divisor. Round the result up to the next pound.

For this box: 64 in³ ÷ 139 = 0.46 → 1 lb at FedEx, UPS Daily Rates and DHL Express. 64 in³ ÷ 166 = 0.39 → 1 lb at UPS Retail Rates. USPS does not use DIM weight for this box. The box is not larger than 1 cubic foot (1,728 in³). USPS uses the actual weight.

Bar chart of the dimensional weight of this box at each carrierFedEx1 lbUPS Daily Rates1 lbUPS Retail Rates1 lbUSPSNo dimensional weight (actual weight only)DHL Express1 lbIf the packed box weighs more than 1 lb, FedEx and UPS bill the actual weight.
Figure 2. Dimensional weight of this box at each US carrier.
Carrier and ratesDivisorDIM weightBilled at leastWorking
FedEx (US)139 in³/lb1 lb1 lb64 ÷ 139 = 0.46
UPS Daily Rates139 in³/lb1 lb1 lbAccount rates
UPS Retail Rates166 in³/lb1 lb1 lbStore and counter rates: 64 ÷ 166 = 0.39
USPS Priority Mail and Ground Advantage139 in³/lb——Not used: 64 in³ is not more than 1,728 in³
DHL Express (from the US)139 in³/lb1 lb1 lbWhole pounds
International, rated in kg5,000 cm³/kg1 kg1 kg11 × 11 × 11 cm ÷ 5,000

“Billed at least” includes a minimum billable weight that the size causes.

Rules verified 22 Sep 2026 · the official sources are listed at the top of this page.

Size limits & surcharges

Size limits for 4 × 4 × 4 in

Carriers measure the length and the girth. The length is the longest side. The girth is the distance around the box at its middle: 2 × (width + height).

For this box, the length is 4 in and the girth is 16 in. Length plus girth is 20 in.

Drawing of the box with the girth measured around its middleLength (longest side) = 4 inGirth = 2 × (4 + 4) = 16 in
Figure 3. Measure the girth around the middle of the box, at a right angle to the length.
Scale of length plus girth from 0 to 180 inches with carrier limits0406080100120140160180105 in: Additional Handling108 in: USPS limit130 in: Large Package165 in: UPS/FedEx maxThis box: 20 in
Figure 4. Length plus girth of this box against the carrier limits.
  • UPS and FedEx Additional Handling (size)Does not apply. Longest side: 4 in (limit 48 in). Second-longest side: 4 in (limit 30 in). Length plus girth: 20 in (limit 105 in). Volume: 64 in³ (limit 10,368 in³).
  • UPS Large Package and FedEx OversizeDoes not apply. Length plus girth: 20 in (limit 130 in). Volume: 64 in³ (limit 17,280 in³). Longest side: 4 in (limit 96 in).
  • UPS and FedEx maximum sizeThe box is within the maximum: 108 in length and 165 in length plus girth.
  • USPS size limitLength plus girth (20 in) is within the USPS limit of 108 in.
  • USPS nonstandard feesDo not apply. The longest side (4 in) is not more than 22 in. The volume (64 in³) is not more than 2 ft³ (3,456 in³).
  • USPS Cubic pricing (commercial)Priority Mail Cubic tier 0.10 and Ground Advantage Cubic tier 0.10. 64 in³ ÷ 1,728 = 0.037 ft³. USPS prices cubic parcels by tier and zone, up to 20 lb. Cubic calculator →
  • DHL Express Oversize PieceDoes not apply. Longest side: 4 in (limit 40 in). Second-longest side: 4 in (limit 32 in).

NOTE: These checks are for size only. Weight rules are separate.

Rules verified 22 Sep 2026 · the official sources are listed at the top of this page.

Measuring

How to measure a 4x4x4 box

Do these steps to get the size that carriers use for this box.

  1. Close all the flaps. Put the box on a flat surface.
  2. Measure the longest side. The inside length is 4 in.
  3. Measure the shorter side of the bottom. The inside width is 4 in.
  4. Measure from the bottom to the top. The inside height is 4 in.
  5. Measure the outside of the box. With a C-flute wall, you get about 4 3/8 × 4 3/8 × 4 3/4 in.
  6. Round each dimension up to the next whole inch. You get 5 × 5 × 5 in.
  7. Multiply the three dimensions: 125 in³. Divide by 139. The DIM weight is 1 lb.

Inside size and outside size

The walls make the outside larger than the inside. A 3/16 in C-flute wall adds about 3/8 in to the length (4 → 4 3/8 in) and the width (4 → 4 3/8 in). The flaps make two layers at the top and the bottom. So the height grows by about 3/4 in (4 → 4 3/4 in).

Cross-section of the box showing inside and outside sizeInside: 4 × 4 inOutside length about 4 3/8 inTop flaps: 2 layersOutside height about 4 3/4 inSide wall: 1 layerBottom flaps: 2 layersC-flute, 3/16 in wall (typical). Wall thickness is not drawn to scale.
Figure 5. Inside and outside size of the box, seen from the front.
BoardWallOutside size (about)Carrier sizeDIM ÷139
B-flute1/8 in4 1/4 × 4 1/4 × 4 1/2 in5 × 5 × 5 in1 lb
C-flute3/16 in4 3/8 × 4 3/8 × 4 3/4 in5 × 5 × 5 in1 lb
BC double wall1/4 in4 1/2 × 4 1/2 × 5 in5 × 5 × 5 in1 lb

NOTE: The C-flute outside size does not change the DIM weight of this box at 139.

NOTE: These wall thicknesses are typical. Measure your box if the size is important.

Packaging

Make the box one inch smaller

One inch less on one side does not change the FedEx and UPS DIM weight of this box.

Changein³DIM ÷139DecreaseUPS Retail ÷166USPS
Length 4 → 3 in481 lbno change1 lbnone (not over 1 ft³)
Box blank

Flat blank for a 4x4x4 box

A regular slotted container (FEFCO 0201) is cut from one flat blank. For this box, the blank is about 17 3/4 × 8 3/8 in, or 1.03 ft² of board. The four side panels are 4 1/8, 4 1/8, 4 1/8 and 4 1/8 in wide and 4 1/4 in high. Each of the eight flaps is 2 1/16 in high, half of the box width.

Flat box blank for a regular slotted container, with panels and flapsLengthWidthLengthWidthBlank width 17 3/4 inBlank height 8 3/8 in
Figure 6. Flat blank to scale. Solid lines are cuts. Dashed lines are folds.

NOTE: The drawing adds 1/8 in at each fold and uses a 1 1/4 in glue flap. Box makers can use other allowances.

Make a printable template for this box →

Pallet

On a 48 × 40 in pallet

Pallets hold boxes by their outside size: about 4 3/8 × 4 3/8 × 4 3/4 in in C-flute board. One layer holds 90 boxes (10 × 9), with the 4 3/4 in side up. 12 layers fit in a 60 in stack. The pallet holds 1,080 boxes, 56.8 ft³ in total. The layer covers 90% of the pallet top.

Pallet diagram: 90 boxes per layer and 12 layersTop view: one layer48 in40 inSide view: stack on the pallet60 in limit12 layers of 4.75 in
Figure 7. One layer from the top, and the full stack from the side.

NOTE: This is a simple column stack with the 4 3/4 in side up and no overhang. A mixed pattern can hold more boxes.

Try mixed patterns, other pallets and other heights →

In a shipping container

Containers hold boxes by their outside size. In C-flute board, this box is about 4 3/8 × 4 3/8 × 4 3/4 in outside. The table gives how many boxes fit with no pallets.

ContainerInside sizeBoxesSpace used
20 ft dry container5.9 × 2.35 × 2.39 m21,16895%
40 ft dry container12.03 × 2.35 × 2.4 m43,65996%
40 ft high cube12.03 × 2.35 × 2.7 m49,89697%

NOTE: All boxes point the same way in one grid, and there is no space for the doors. Real loads hold fewer boxes. Container sizes are nominal Hapag-Lloyd values.

Plan a mixed load in 3D, with turned boxes and loading steps →

Amazon FBA

Size tier

At the lowest weight, this box is in the Large standard tier. It is not in the Small standard tier. The shortest side (4 in) is more than 0.75 in. Amazon uses the larger of the unit weight and the DIM weight (0.46 lb).

Rules verified 22 Sep 2026 · sources: Amazon Seller Central — Product size tiers

Heavier contents can move the box to a higher tier. Check with the weight of your product. Refer to the FBA dimensional weight guide for the 2026 fees.

USPS Flat Rate

Compare with USPS Flat Rate boxes

This box fits inside the USPS Medium Flat Rate Box 1 and USPS Large Flat Rate Box. The fit uses the inside size of the Flat Rate box. Measure the outside of your box to check.

Top views to scale of this box and the USPS Flat Rate boxesThis box4 × 4 inSmall FRB8 5/8 × 5 3/8 inMedium FRB 111 × 8 1/2 inMedium FRB 213 5/8 × 11 7/8 inLarge FRB12 × 11 3/4 in
Figure 8. Top views to scale. The USPS boxes show their inside size.

Sizes of all carrier boxes: USPS · UPS · FedEx · Cheapest way to ship this box

Boxes inside this box

No smaller standard box fits two or more times in this box.

Boxes that hold this box

To ship this box inside another box, use a box that gives at least 1/2 in of space on each side. Fill the space with padding.

Larger boxSpace for paddingPart of the larger box
5 × 5 × 5 in61 in³49%
6 × 6 × 6 in152 in³70%
8 × 6 × 6 in224 in³78%
FAQ

4x4x4 box questions

How many cubic feet is a 4x4x4 box?
4 × 4 × 4 = 64 in³. One cubic foot is 1,728 in³. So the box holds 0.037 cubic feet. This is 1 liters or 0.28 US gallons.
What is the dimensional weight of a 4x4x4 box?
FedEx, UPS Daily Rates and DHL Express divide 64 in³ by 139. They round up to 1 lb. UPS Retail Rates divide by 166, which gives 1 lb. USPS does not use DIM weight for this box, because it is not larger than 1 cubic foot. You pay for the larger value: the actual weight or the DIM weight.
What is the length plus girth of a 4x4x4 box?
The length is the longest side, 4 in. The girth is 2 × (4 + 4) = 16 in. Length plus girth is 20 in. This is within the USPS limit of 108 in.
What is the outside size of a 4x4x4 box?
Box makers usually give the inside size. A C-flute box with a 3/16 in wall is about 4 3/8 × 4 3/8 × 4 3/4 in on the outside. Carriers round this up to 5 × 5 × 5 in. The DIM weight is then 1 lb at 139.
Does a 4x4x4 box get oversize or Additional Handling fees?
Not for its size. The box is below all UPS and FedEx Additional Handling size limits. Contents that weigh more than 50 lb still cause Additional Handling.
How many 4x4x4 boxes fit on a pallet?
The outside of the box is about 4 3/8 × 4 3/8 × 4 3/4 in in C-flute board. On a 48 × 40 in pallet, one layer holds 90 boxes with the 4 3/4 in side up. 12 layers fit in a 60 in stack. This gives 1,080 boxes.
How many 4x4x4 boxes fit in a 40 ft container?
About 43,659 boxes, if all boxes point the same way and there are no pallets. This uses the outside size in C-flute board. Real loads hold fewer boxes.
What Amazon FBA size tier is a 4x4x4 box?
At the lowest weight, the box is in the Large standard tier. Amazon uses the larger of the unit weight and the DIM weight (0.46 lb). Heavier contents can move the box to a higher tier.