12 × 10 × 6 box
volume, size & shipping weight
A 12 × 10 × 6 in box holds 720 cubic inches. This is 0.417 cubic feet, or 11.8 liters. In metric units, the box is 30.5 × 25.4 × 15.2 cm. This is a standard carton shape. The longest side is 2 times the shortest side.
Dimensions of a 12x10x6 box
Figure 1 shows the box from the front, the top and the side, to scale. The front view shows the 12 in length and the 6 in height. The top view adds the 10 in width.
| Dimension | Inches | Centimeters | Millimeters |
|---|---|---|---|
| Length | 12 in | 30.5 cm | 305 mm |
| Width | 10 in | 25.4 cm | 254 mm |
| Height | 6 in | 15.2 cm | 152 mm |
| Property | Value | Use |
|---|---|---|
| Volume | 720 in³ · 0.417 ft³ | The space inside the box. |
| Surface area | 504 in² · 3.5 ft² | The board area of the six faces, without flaps or overlap. |
| Largest face | 120 in² (top and bottom) | Put a label or a packing list on this face. |
| Space diagonal | 16.7 in | The longest straight item that fits, from one corner to the opposite corner. |
NOTE: Box makers usually give the inside size. Carriers measure the outside: about 12 3/8 × 10 3/8 × 6 3/4 in for this box in C-flute board.
Dimensional weight of a 12x10x6 box
Carriers bill the larger of two weights: the actual weight and the dimensional (DIM) weight. To find the DIM weight, multiply the three sides. Then divide by the carrier divisor. Round the result up to the next pound.
For this box: 720 in³ ÷ 139 = 5.18 → 6 lb at FedEx, UPS Daily Rates and DHL Express. 720 in³ ÷ 166 = 4.34 → 5 lb at UPS Retail Rates. USPS does not use DIM weight for this box. The box is not larger than 1 cubic foot (1,728 in³). USPS uses the actual weight.
| Carrier and rates | Divisor | DIM weight | Billed at least | Working |
|---|---|---|---|---|
| FedEx (US) | 139 in³/lb | 6 lb | 6 lb | 720 ÷ 139 = 5.18 |
| UPS Daily Rates | 139 in³/lb | 6 lb | 6 lb | Account rates |
| UPS Retail Rates | 166 in³/lb | 5 lb | 5 lb | Store and counter rates: 720 ÷ 166 = 4.34 |
| USPS Priority Mail and Ground Advantage | 139 in³/lb | — | — | Not used: 720 in³ is not more than 1,728 in³ |
| DHL Express (from the US) | 139 in³/lb | 6 lb | 6 lb | Whole pounds |
| International, rated in kg | 5,000 cm³/kg | 3 kg | 3 kg | 31 × 26 × 16 cm ÷ 5,000 |
“Billed at least” includes a minimum billable weight that the size causes.
Rules verified 22 Sep 2026 · the official sources are listed at the top of this page.
Size limits for 12 × 10 × 6 in
Carriers measure the length and the girth. The length is the longest side. The girth is the distance around the box at its middle: 2 × (width + height).
For this box, the length is 12 in and the girth is 32 in. Length plus girth is 44 in.
- UPS and FedEx Additional Handling (size)Does not apply. Longest side: 12 in (limit 48 in). Second-longest side: 10 in (limit 30 in). Length plus girth: 44 in (limit 105 in). Volume: 720 in³ (limit 10,368 in³).
- UPS Large Package and FedEx OversizeDoes not apply. Length plus girth: 44 in (limit 130 in). Volume: 720 in³ (limit 17,280 in³). Longest side: 12 in (limit 96 in).
- UPS and FedEx maximum sizeThe box is within the maximum: 108 in length and 165 in length plus girth.
- USPS size limitLength plus girth (44 in) is within the USPS limit of 108 in.
- USPS nonstandard feesDo not apply. The longest side (12 in) is not more than 22 in. The volume (720 in³) is not more than 2 ft³ (3,456 in³).
- USPS Cubic pricing (commercial)Priority Mail Cubic tier 0.50 and Ground Advantage Cubic tier 0.50. 720 in³ ÷ 1,728 = 0.417 ft³. USPS prices cubic parcels by tier and zone, up to 20 lb. Cubic calculator →
- DHL Express Oversize PieceDoes not apply. Longest side: 12 in (limit 40 in). Second-longest side: 10 in (limit 32 in).
NOTE: These checks are for size only. Weight rules are separate.
Rules verified 22 Sep 2026 · the official sources are listed at the top of this page.
How to measure a 12x10x6 box
Do these steps to get the size that carriers use for this box.
- Close all the flaps. Put the box on a flat surface.
- Measure the longest side. The inside length is 12 in.
- Measure the shorter side of the bottom. The inside width is 10 in.
- Measure from the bottom to the top. The inside height is 6 in.
- Measure the outside of the box. With a C-flute wall, you get about 12 3/8 × 10 3/8 × 6 3/4 in.
- Round each dimension up to the next whole inch. You get 13 × 11 × 7 in.
- Multiply the three dimensions: 1,001 in³. Divide by 139. The DIM weight is 8 lb.
Inside size and outside size
The walls make the outside larger than the inside. A 3/16 in C-flute wall adds about 3/8 in to the length (12 → 12 3/8 in) and the width (10 → 10 3/8 in). The flaps make two layers at the top and the bottom. So the height grows by about 3/4 in (6 → 6 3/4 in).
| Board | Wall | Outside size (about) | Carrier size | DIM ÷139 |
|---|---|---|---|---|
| B-flute | 1/8 in | 12 1/4 × 10 1/4 × 6 1/2 in | 13 × 11 × 7 in | 8 lb |
| C-flute | 3/16 in | 12 3/8 × 10 3/8 × 6 3/4 in | 13 × 11 × 7 in | 8 lb |
| BC double wall | 1/4 in | 12 1/2 × 10 1/2 × 7 in | 13 × 11 × 7 in | 8 lb |
CAUTION: With a C-flute wall, carriers measure about 13 × 11 × 7 in. The DIM weight goes up from 6 lb to 8 lb. Use the outside size to estimate the shipping cost.
NOTE: These wall thicknesses are typical. Measure your box if the size is important.
Make the box one inch smaller
One inch less on one side can lower the DIM weight. The best change is the height: 6 → 5 in. This lowers the FedEx and UPS DIM weight from 6 lb to 5 lb.
| Change | in³ | DIM ÷139 | Decrease | UPS Retail ÷166 | USPS |
|---|---|---|---|---|---|
| Length 12 → 11 in | 660 | 5 lb | −1 lb | 4 lb | none (not over 1 ft³) |
| Width 10 → 9 in | 648 | 5 lb | −1 lb | 4 lb | none (not over 1 ft³) |
| Height 6 → 5 in | 600 | 5 lb | −1 lb | 4 lb | none (not over 1 ft³) |
Flat blank for a 12x10x6 box
A regular slotted container (FEFCO 0201) is cut from one flat blank. For this box, the blank is about 45 3/4 × 16 3/8 in, or 5.2 ft² of board. The four side panels are 12 1/8, 10 1/8, 12 1/8 and 10 1/8 in wide and 6 1/4 in high. Each of the eight flaps is 5 1/16 in high, half of the box width.
NOTE: The drawing adds 1/8 in at each fold and uses a 1 1/4 in glue flap. Box makers can use other allowances.
On a 48 × 40 in pallet
Pallets hold boxes by their outside size: about 10 3/8 × 12 3/8 × 6 3/4 in in C-flute board. One layer holds 12 boxes (4 × 3), with the 6 3/4 in side up. 8 layers fit in a 60 in stack. The pallet holds 96 boxes, 48.1 ft³ in total. The layer covers 80% of the pallet top.
NOTE: This is a simple column stack with the 6 3/4 in side up and no overhang. A mixed pattern can hold more boxes.
Try mixed patterns, other pallets and other heights →
In a shipping container
Containers hold boxes by their outside size. In C-flute board, this box is about 12 3/8 × 10 3/8 × 6 3/4 in outside. The table gives how many boxes fit with no pallets.
| Container | Inside size | Boxes | Space used |
|---|---|---|---|
| 20 ft dry container | 5.9 × 2.35 × 2.39 m | 2,142 | 92% |
| 40 ft dry container | 12.03 × 2.35 × 2.4 m | 4,446 | 93% |
| 40 ft high cube | 12.03 × 2.35 × 2.7 m | 4,940 | 92% |
NOTE: All boxes point the same way in one grid, and there is no space for the doors. Real loads hold fewer boxes. Container sizes are nominal Hapag-Lloyd values.
Plan a mixed load in 3D, with turned boxes and loading steps →
Size tier
At the lowest weight, this box is in the Large standard tier. It is not in the Small standard tier. The shortest side (6 in) is more than 0.75 in. The DIM weight (5.18 lb) is more than 1 lb. Amazon uses the larger of the unit weight and the DIM weight (5.18 lb).
Rules verified 22 Sep 2026 · sources: Amazon Seller Central — Product size tiers
Heavier contents can move the box to a higher tier. Check with the weight of your product. Refer to the FBA dimensional weight guide for the 2026 fees.
Compare with USPS Flat Rate boxes
This box does not fit in a USPS Flat Rate box. The Large Flat Rate Box is 12 × 11 3/4 × 5 1/2 in inside. The Medium Flat Rate Box 2 is 13 5/8 × 11 7/8 × 3 3/8 in inside.
Sizes of all carrier boxes: USPS · UPS · FedEx · Cheapest way to ship this box
Boxes inside this box
You can pack smaller standard boxes inside this box. The table shows the sizes that use the most space.
| Smaller box | How many fit | Space used |
|---|---|---|
| 10 × 6 × 6 in | 2 | 100% |
| 10 × 6 × 4 in | 3 | 100% |
| 9 × 6 × 6 in | 2 | 90% |
| 12 × 9 × 3 in | 2 | 90% |
Boxes that hold this box
To ship this box inside another box, use a box that gives at least 1/2 in of space on each side. Fill the space with padding.
| Larger box | Space for padding | Part of the larger box |
|---|---|---|
| 14 × 12 × 8 in | 624 in³ | 46% |
| 15 × 12 × 8 in | 720 in³ | 50% |
| 16 × 12 × 8 in | 816 in³ | 53% |