9 × 9 × 9 box
volume, size & shipping weight

A 9 × 9 × 9 in box holds 729 cubic inches. This is 0.422 cubic feet, or 11.9 liters. In metric units, the box is 22.9 × 22.9 × 22.9 cm. All three sides have the same length. This box is a cube.

Cubic feet0.422 ft³
Cubic inches729 in³
Liters11.9 L
US gallons3.16 gal
Cubic meters0.0119 m³
9 in9 in9 in
Drawn to scale · surface area 486 in² · space diagonal 15.6 in
Drawing

Dimensions of a 9x9x9 box

Figure 1 shows the box from the front, the top and the side, to scale. The front view shows the 9 in length and the 9 in height. The top view adds the 9 in width.

Front, top and side views of a 9 by 9 by 9 inch box, drawn to scaleTOPFRONTSIDELength 9 in (22.9 cm)Width 9 inHeight 9 in9 in
Figure 1. Front, top and side views of the 9 × 9 × 9 in box. All dimensions are inside dimensions.
DimensionInchesCentimetersMillimeters
Length9 in22.9 cm229 mm
Width9 in22.9 cm229 mm
Height9 in22.9 cm229 mm
PropertyValueUse
Volume729 in³ · 0.422 ft³The space inside the box.
Surface area486 in² · 3.38 ft²The board area of the six faces, without flaps or overlap.
Largest face81 in² (two ends)Put a label or a packing list on this face.
Space diagonal15.6 inThe longest straight item that fits, from one corner to the opposite corner.

NOTE: Box makers usually give the inside size. Carriers measure the outside: about 9 3/8 × 9 3/8 × 9 3/4 in for this box in C-flute board.

Dimensional weight

Dimensional weight of a 9x9x9 box

Carriers bill the larger of two weights: the actual weight and the dimensional (DIM) weight. To find the DIM weight, multiply the three sides. Then divide by the carrier divisor. Round the result up to the next pound.

For this box: 729 in³ ÷ 139 = 5.24 → 6 lb at FedEx, UPS Daily Rates and DHL Express. 729 in³ ÷ 166 = 4.39 → 5 lb at UPS Retail Rates. USPS does not use DIM weight for this box. The box is not larger than 1 cubic foot (1,728 in³). USPS uses the actual weight.

Bar chart of the dimensional weight of this box at each carrierFedEx6 lbUPS Daily Rates6 lbUPS Retail Rates5 lbUSPSNo dimensional weight (actual weight only)DHL Express6 lbIf the packed box weighs more than 6 lb, FedEx and UPS bill the actual weight.
Figure 2. Dimensional weight of this box at each US carrier.
Carrier and ratesDivisorDIM weightBilled at leastWorking
FedEx (US)139 in³/lb6 lb6 lb729 ÷ 139 = 5.24
UPS Daily Rates139 in³/lb6 lb6 lbAccount rates
UPS Retail Rates166 in³/lb5 lb5 lbStore and counter rates: 729 ÷ 166 = 4.39
USPS Priority Mail and Ground Advantage139 in³/lb——Not used: 729 in³ is not more than 1,728 in³
DHL Express (from the US)139 in³/lb6 lb6 lbWhole pounds
International, rated in kg5,000 cm³/kg3 kg3 kg23 × 23 × 23 cm ÷ 5,000

“Billed at least” includes a minimum billable weight that the size causes.

Rules verified 22 Sep 2026 · the official sources are listed at the top of this page.

Size limits & surcharges

Size limits for 9 × 9 × 9 in

Carriers measure the length and the girth. The length is the longest side. The girth is the distance around the box at its middle: 2 × (width + height).

For this box, the length is 9 in and the girth is 36 in. Length plus girth is 45 in.

Drawing of the box with the girth measured around its middleLength (longest side) = 9 inGirth = 2 × (9 + 9) = 36 in
Figure 3. Measure the girth around the middle of the box, at a right angle to the length.
Scale of length plus girth from 0 to 180 inches with carrier limits020406080100120140160180105 in: Additional Handling108 in: USPS limit130 in: Large Package165 in: UPS/FedEx maxThis box: 45 in
Figure 4. Length plus girth of this box against the carrier limits.
  • UPS and FedEx Additional Handling (size)Does not apply. Longest side: 9 in (limit 48 in). Second-longest side: 9 in (limit 30 in). Length plus girth: 45 in (limit 105 in). Volume: 729 in³ (limit 10,368 in³).
  • UPS Large Package and FedEx OversizeDoes not apply. Length plus girth: 45 in (limit 130 in). Volume: 729 in³ (limit 17,280 in³). Longest side: 9 in (limit 96 in).
  • UPS and FedEx maximum sizeThe box is within the maximum: 108 in length and 165 in length plus girth.
  • USPS size limitLength plus girth (45 in) is within the USPS limit of 108 in.
  • USPS nonstandard feesDo not apply. The longest side (9 in) is not more than 22 in. The volume (729 in³) is not more than 2 ft³ (3,456 in³).
  • USPS Cubic pricing (commercial)Priority Mail Cubic tier 0.50 and Ground Advantage Cubic tier 0.50. 729 in³ ÷ 1,728 = 0.422 ft³. USPS prices cubic parcels by tier and zone, up to 20 lb. Cubic calculator →
  • DHL Express Oversize PieceDoes not apply. Longest side: 9 in (limit 40 in). Second-longest side: 9 in (limit 32 in).

NOTE: These checks are for size only. Weight rules are separate.

Rules verified 22 Sep 2026 · the official sources are listed at the top of this page.

Measuring

How to measure a 9x9x9 box

Do these steps to get the size that carriers use for this box.

  1. Close all the flaps. Put the box on a flat surface.
  2. Measure the longest side. The inside length is 9 in.
  3. Measure the shorter side of the bottom. The inside width is 9 in.
  4. Measure from the bottom to the top. The inside height is 9 in.
  5. Measure the outside of the box. With a C-flute wall, you get about 9 3/8 × 9 3/8 × 9 3/4 in.
  6. Round each dimension up to the next whole inch. You get 10 × 10 × 10 in.
  7. Multiply the three dimensions: 1,000 in³. Divide by 139. The DIM weight is 8 lb.

Inside size and outside size

The walls make the outside larger than the inside. A 3/16 in C-flute wall adds about 3/8 in to the length (9 → 9 3/8 in) and the width (9 → 9 3/8 in). The flaps make two layers at the top and the bottom. So the height grows by about 3/4 in (9 → 9 3/4 in).

Cross-section of the box showing inside and outside sizeInside: 9 × 9 inOutside length about 9 3/8 inTop flaps: 2 layersOutside height about 9 3/4 inSide wall: 1 layerBottom flaps: 2 layersC-flute, 3/16 in wall (typical). Wall thickness is not drawn to scale.
Figure 5. Inside and outside size of the box, seen from the front.
BoardWallOutside size (about)Carrier sizeDIM ÷139
B-flute1/8 in9 1/4 × 9 1/4 × 9 1/2 in10 × 10 × 10 in8 lb
C-flute3/16 in9 3/8 × 9 3/8 × 9 3/4 in10 × 10 × 10 in8 lb
BC double wall1/4 in9 1/2 × 9 1/2 × 10 in10 × 10 × 10 in8 lb

CAUTION: With a C-flute wall, carriers measure about 10 × 10 × 10 in. The DIM weight goes up from 6 lb to 8 lb. Use the outside size to estimate the shipping cost.

NOTE: These wall thicknesses are typical. Measure your box if the size is important.

Packaging

Make the box one inch smaller

One inch less on one side can lower the DIM weight. The best change is the length: 9 → 8 in. This lowers the FedEx and UPS DIM weight from 6 lb to 5 lb.

Changein³DIM ÷139DecreaseUPS Retail ÷166USPS
Length 9 → 8 in6485 lb−1 lb4 lbnone (not over 1 ft³)
Box blank

Flat blank for a 9x9x9 box

A regular slotted container (FEFCO 0201) is cut from one flat blank. For this box, the blank is about 37 3/4 × 18 3/8 in, or 4.82 ft² of board. The four side panels are 9 1/8, 9 1/8, 9 1/8 and 9 1/8 in wide and 9 1/4 in high. Each of the eight flaps is 4 9/16 in high, half of the box width.

Flat box blank for a regular slotted container, with panels and flapsLengthWidthLengthWidthBlank width 37 3/4 inBlank height 18 3/8 in
Figure 6. Flat blank to scale. Solid lines are cuts. Dashed lines are folds.

NOTE: The drawing adds 1/8 in at each fold and uses a 1 1/4 in glue flap. Box makers can use other allowances.

Make a printable template for this box →

Pallet

On a 48 × 40 in pallet

Pallets hold boxes by their outside size: about 9 3/8 × 9 3/8 × 9 3/4 in in C-flute board. One layer holds 20 boxes (5 × 4), with the 9 3/4 in side up. 6 layers fit in a 60 in stack. The pallet holds 120 boxes, 59.5 ft³ in total. The layer covers 92% of the pallet top.

Pallet diagram: 20 boxes per layer and 6 layersTop view: one layer48 in40 inSide view: stack on the pallet60 in limit6 layers of 9.75 in
Figure 7. One layer from the top, and the full stack from the side.

NOTE: This is a simple column stack with the 9 3/4 in side up and no overhang. A mixed pattern can hold more boxes.

Try mixed patterns, other pallets and other heights →

In a shipping container

Containers hold boxes by their outside size. In C-flute board, this box is about 9 3/8 × 9 3/8 × 9 3/4 in outside. The table gives how many boxes fit with no pallets.

ContainerInside sizeBoxesSpace used
20 ft dry container5.9 × 2.35 × 2.39 m2,16091%
40 ft dry container12.03 × 2.35 × 2.4 m4,50093%
40 ft high cube12.03 × 2.35 × 2.7 m4,95091%

NOTE: All boxes point the same way in one grid, and there is no space for the doors. Real loads hold fewer boxes. Container sizes are nominal Hapag-Lloyd values.

Plan a mixed load in 3D, with turned boxes and loading steps →

Amazon FBA

Size tier

At the lowest weight, this box is in the Small Bulky tier. It is not in the Large standard tier. The shortest side (9 in) is more than 8 in. Amazon uses the larger of the unit weight and the DIM weight (5.24 lb).

Rules verified 22 Sep 2026 · sources: Amazon Seller Central — Product size tiers

Heavier contents can move the box to a higher tier. Check with the weight of your product. Refer to the FBA dimensional weight guide for the 2026 fees.

USPS Flat Rate

Compare with USPS Flat Rate boxes

This box does not fit in a USPS Flat Rate box. The Large Flat Rate Box is 12 × 11 3/4 × 5 1/2 in inside. The Medium Flat Rate Box 2 is 13 5/8 × 11 7/8 × 3 3/8 in inside.

Top views to scale of this box and the USPS Flat Rate boxesThis box9 × 9 inSmall FRB8 5/8 × 5 3/8 inMedium FRB 111 × 8 1/2 inMedium FRB 213 5/8 × 11 7/8 inLarge FRB12 × 11 3/4 in
Figure 8. Top views to scale. The USPS boxes show their inside size.

Sizes of all carrier boxes: USPS · UPS · FedEx · Cheapest way to ship this box

Boxes inside this box

You can pack smaller standard boxes inside this box. The table shows the sizes that use the most space.

Smaller boxHow many fitSpace used
8 × 8 × 4 in270%
8 × 4 × 4 in470%
4 × 4 × 4 in870%
9 × 6 × 3 in367%

Boxes that hold this box

To ship this box inside another box, use a box that gives at least 1/2 in of space on each side. Fill the space with padding.

Larger boxSpace for paddingPart of the larger box
10 × 10 × 10 in271 in³27%
12 × 10 × 10 in471 in³39%
11 × 11 × 11 in602 in³45%
FAQ

9x9x9 box questions

How many cubic feet is a 9x9x9 box?
9 × 9 × 9 = 729 in³. One cubic foot is 1,728 in³. So the box holds 0.422 cubic feet. This is 11.9 liters or 3.16 US gallons.
What is the dimensional weight of a 9x9x9 box?
FedEx, UPS Daily Rates and DHL Express divide 729 in³ by 139. They round up to 6 lb. UPS Retail Rates divide by 166, which gives 5 lb. USPS does not use DIM weight for this box, because it is not larger than 1 cubic foot. You pay for the larger value: the actual weight or the DIM weight.
What is the length plus girth of a 9x9x9 box?
The length is the longest side, 9 in. The girth is 2 × (9 + 9) = 36 in. Length plus girth is 45 in. This is within the USPS limit of 108 in.
What is the outside size of a 9x9x9 box?
Box makers usually give the inside size. A C-flute box with a 3/16 in wall is about 9 3/8 × 9 3/8 × 9 3/4 in on the outside. Carriers round this up to 10 × 10 × 10 in. The DIM weight is then 8 lb at 139.
Does a 9x9x9 box get oversize or Additional Handling fees?
Not for its size. The box is below all UPS and FedEx Additional Handling size limits. Contents that weigh more than 50 lb still cause Additional Handling.
How many 9x9x9 boxes fit on a pallet?
The outside of the box is about 9 3/8 × 9 3/8 × 9 3/4 in in C-flute board. On a 48 × 40 in pallet, one layer holds 20 boxes with the 9 3/4 in side up. 6 layers fit in a 60 in stack. This gives 120 boxes.
How many 9x9x9 boxes fit in a 40 ft container?
About 4,500 boxes, if all boxes point the same way and there are no pallets. This uses the outside size in C-flute board. Real loads hold fewer boxes.
What Amazon FBA size tier is a 9x9x9 box?
At the lowest weight, the box is in the Small Bulky tier. Amazon uses the larger of the unit weight and the DIM weight (5.24 lb). Heavier contents can move the box to a higher tier.