20 × 20 × 12 box
volume, size & shipping weight

A 20 × 20 × 12 in box holds 4,800 cubic inches. This is 2.778 cubic feet, or 78.7 liters. In metric units, the box is 50.8 × 50.8 × 30.5 cm. This is a standard carton shape. The longest side is 1.7 times the shortest side.

Cubic feet2.778 ft³
Cubic inches4,800 in³
Liters78.7 L
US gallons20.78 gal
Cubic meters0.0787 m³
20 in20 in12 in
Drawn to scale · surface area 1,760 in² · space diagonal 30.7 in
Drawing

Dimensions of a 20x20x12 box

Figure 1 shows the box from the front, the top and the side, to scale. The front view shows the 20 in length and the 12 in height. The top view adds the 20 in width.

Front, top and side views of a 20 by 20 by 12 inch box, drawn to scaleTOPFRONTSIDELength 20 in (50.8 cm)Width 20 in (50.8 cm)Height 12 in20 in
Figure 1. Front, top and side views of the 20 × 20 × 12 in box. All dimensions are inside dimensions.
DimensionInchesCentimetersMillimeters
Length20 in50.8 cm508 mm
Width20 in50.8 cm508 mm
Height12 in30.5 cm305 mm
PropertyValueUse
Volume4,800 in³ · 2.778 ft³The space inside the box.
Surface area1,760 in² · 12.22 ft²The board area of the six faces, without flaps or overlap.
Largest face400 in² (top and bottom)Put a label or a packing list on this face.
Space diagonal30.7 inThe longest straight item that fits, from one corner to the opposite corner.

NOTE: Box makers usually give the inside size. Carriers measure the outside: about 20 3/8 × 20 3/8 × 12 3/4 in for this box in C-flute board.

Dimensional weight

Dimensional weight of a 20x20x12 box

Carriers bill the larger of two weights: the actual weight and the dimensional (DIM) weight. To find the DIM weight, multiply the three sides. Then divide by the carrier divisor. Round the result up to the next pound.

For this box: 4,800 in³ ÷ 139 = 34.53 → 35 lb at FedEx, UPS Daily Rates and DHL Express. 4,800 in³ ÷ 166 = 28.92 → 29 lb at UPS Retail Rates. USPS uses DIM weight for this box, because the box is larger than 1 cubic foot (1,728 in³). The USPS DIM weight is 35 lb.

Bar chart of the dimensional weight of this box at each carrierFedEx35 lbUPS Daily Rates35 lbUPS Retail Rates29 lbUSPS35 lbDHL Express35 lbIf the packed box weighs more than 35 lb, FedEx and UPS bill the actual weight.
Figure 2. Dimensional weight of this box at each US carrier.
Carrier and ratesDivisorDIM weightBilled at leastWorking
FedEx (US)139 in³/lb35 lb35 lb4,800 ÷ 139 = 34.53
UPS Daily Rates139 in³/lb35 lb35 lbAccount rates
UPS Retail Rates166 in³/lb29 lb29 lbStore and counter rates: 4,800 ÷ 166 = 28.92
USPS Priority Mail and Ground Advantage139 in³/lb35 lb35 lb4,800 in³ is more than 1,728 in³
DHL Express (from the US)139 in³/lb35 lb35 lbWhole pounds
International, rated in kg5,000 cm³/kg17 kg17 kg51 × 51 × 31 cm ÷ 5,000

“Billed at least” includes a minimum billable weight that the size causes.

Rules verified 22 Sep 2026 · the official sources are listed at the top of this page.

Size limits & surcharges

Size limits for 20 × 20 × 12 in

Carriers measure the length and the girth. The length is the longest side. The girth is the distance around the box at its middle: 2 × (width + height).

For this box, the length is 20 in and the girth is 64 in. Length plus girth is 84 in.

Drawing of the box with the girth measured around its middleLength (longest side) = 20 inGirth = 2 × (20 + 12) = 64 in
Figure 3. Measure the girth around the middle of the box, at a right angle to the length.
Scale of length plus girth from 0 to 180 inches with carrier limits0204060100120140160180105 in: Additional Handling108 in: USPS limit130 in: Large Package165 in: UPS/FedEx maxThis box: 84 in
Figure 4. Length plus girth of this box against the carrier limits.
  • UPS and FedEx Additional Handling (size)Does not apply. Longest side: 20 in (limit 48 in). Second-longest side: 20 in (limit 30 in). Length plus girth: 84 in (limit 105 in). Volume: 4,800 in³ (limit 10,368 in³).
  • UPS Large Package and FedEx OversizeDoes not apply. Length plus girth: 84 in (limit 130 in). Volume: 4,800 in³ (limit 17,280 in³). Longest side: 20 in (limit 96 in).
  • UPS and FedEx maximum sizeThe box is within the maximum: 108 in length and 165 in length plus girth.
  • USPS size limitLength plus girth (84 in) is within the USPS limit of 108 in.
  • USPS nonstandard feesApply. The volume (4,800 in³) is more than 3,456 in³.
  • USPS Cubic pricing (commercial)Not available. The volume (2.778 ft³) is more than 1 ft³. Cubic calculator →
  • DHL Express Oversize PieceDoes not apply. Longest side: 20 in (limit 40 in). Second-longest side: 20 in (limit 32 in).

NOTE: These checks are for size only. Weight rules are separate.

Rules verified 22 Sep 2026 · the official sources are listed at the top of this page.

Measuring

How to measure a 20x20x12 box

Do these steps to get the size that carriers use for this box.

  1. Close all the flaps. Put the box on a flat surface.
  2. Measure the longest side. The inside length is 20 in.
  3. Measure the shorter side of the bottom. The inside width is 20 in.
  4. Measure from the bottom to the top. The inside height is 12 in.
  5. Measure the outside of the box. With a C-flute wall, you get about 20 3/8 × 20 3/8 × 12 3/4 in.
  6. Round each dimension up to the next whole inch. You get 21 × 21 × 13 in.
  7. Multiply the three dimensions: 5,733 in³. Divide by 139. The DIM weight is 42 lb.

Inside size and outside size

The walls make the outside larger than the inside. A 3/16 in C-flute wall adds about 3/8 in to the length (20 → 20 3/8 in) and the width (20 → 20 3/8 in). The flaps make two layers at the top and the bottom. So the height grows by about 3/4 in (12 → 12 3/4 in).

Cross-section of the box showing inside and outside sizeInside: 20 × 12 inOutside length about 20 3/8 inTop flaps: 2 layersOutside height about 12 3/4 inSide wall: 1 layerBottom flaps: 2 layersC-flute, 3/16 in wall (typical). Wall thickness is not drawn to scale.
Figure 5. Inside and outside size of the box, seen from the front.
BoardWallOutside size (about)Carrier sizeDIM ÷139
B-flute1/8 in20 1/4 × 20 1/4 × 12 1/2 in21 × 21 × 13 in42 lb
C-flute3/16 in20 3/8 × 20 3/8 × 12 3/4 in21 × 21 × 13 in42 lb
BC double wall1/4 in20 1/2 × 20 1/2 × 13 in21 × 21 × 13 in42 lb

CAUTION: With a C-flute wall, carriers measure about 21 × 21 × 13 in. The DIM weight goes up from 35 lb to 42 lb. Use the outside size to estimate the shipping cost.

NOTE: These wall thicknesses are typical. Measure your box if the size is important.

Packaging

Make the box one inch smaller

One inch less on one side can lower the DIM weight. The best change is the height: 12 → 11 in. This lowers the FedEx and UPS DIM weight from 35 lb to 32 lb.

Changein³DIM ÷139DecreaseUPS Retail ÷166USPS
Length 20 → 19 in4,56033 lb−2 lb28 lb33 lb
Width 20 → 19 in4,56033 lb−2 lb28 lb33 lb
Height 12 → 11 in4,40032 lb−3 lb27 lb32 lb
Box blank

Flat blank for a 20x20x12 box

A regular slotted container (FEFCO 0201) is cut from one flat blank. For this box, the blank is about 81 3/4 × 32 3/8 in, or 18.38 ft² of board. The four side panels are 20 1/8, 20 1/8, 20 1/8 and 20 1/8 in wide and 12 1/4 in high. Each of the eight flaps is 10 1/16 in high, half of the box width.

Flat box blank for a regular slotted container, with panels and flapsLengthWidthLengthWidthBlank width 81 3/4 inBlank height 32 3/8 in
Figure 6. Flat blank to scale. Solid lines are cuts. Dashed lines are folds.

NOTE: The drawing adds 1/8 in at each fold and uses a 1 1/4 in glue flap. Box makers can use other allowances.

Make a printable template for this box →

Pallet

On a 48 × 40 in pallet

Pallets hold boxes by their outside size: about 20 3/8 × 20 3/8 × 12 3/4 in in C-flute board. One layer holds 2 boxes (2 × 1), with the 12 3/4 in side up. 4 layers fit in a 60 in stack. The pallet holds 8 boxes, 24.5 ft³ in total. The layer covers 43% of the pallet top.

Pallet diagram: 2 boxes per layer and 4 layersTop view: one layer48 in40 inSide view: stack on the pallet60 in limit4 layers of 12.75 in
Figure 7. One layer from the top, and the full stack from the side.

NOTE: This is a simple column stack with the 12 3/4 in side up and no overhang. A mixed pattern can hold more boxes.

Try mixed patterns, other pallets and other heights →

In a shipping container

Containers hold boxes by their outside size. In C-flute board, this box is about 20 3/8 × 20 3/8 × 12 3/4 in outside. The table gives how many boxes fit with no pallets.

ContainerInside sizeBoxesSpace used
20 ft dry container5.9 × 2.35 × 2.39 m30880%
40 ft dry container12.03 × 2.35 × 2.4 m64482%
40 ft high cube12.03 × 2.35 × 2.7 m80591%

NOTE: All boxes point the same way in one grid, and there is no space for the doors. Real loads hold fewer boxes. Container sizes are nominal Hapag-Lloyd values.

Plan a mixed load in 3D, with turned boxes and loading steps →

Amazon FBA

Size tier

At the lowest weight, this box is in the Small Bulky tier. It is not in the Large standard tier. The longest side (20 in) is more than 18 in. The median side (20 in) is more than 14 in. The shortest side (12 in) is more than 8 in. The DIM weight (34.53 lb) is more than 20 lb. Amazon uses the larger of the unit weight and the DIM weight (34.53 lb).

Rules verified 22 Sep 2026 · sources: Amazon Seller Central — Product size tiers

Heavier contents can move the box to a higher tier. Check with the weight of your product. Refer to the FBA dimensional weight guide for the 2026 fees.

USPS Flat Rate

Compare with USPS Flat Rate boxes

This box does not fit in a USPS Flat Rate box. The Large Flat Rate Box is 12 × 11 3/4 × 5 1/2 in inside. The Medium Flat Rate Box 2 is 13 5/8 × 11 7/8 × 3 3/8 in inside.

Top views to scale of this box and the USPS Flat Rate boxesThis box20 × 20 inSmall FRB8 5/8 × 5 3/8 inMedium FRB 111 × 8 1/2 inMedium FRB 213 5/8 × 11 7/8 inLarge FRB12 × 11 3/4 in
Figure 8. Top views to scale. The USPS boxes show their inside size.

Sizes of all carrier boxes: USPS · UPS · FedEx · Cheapest way to ship this box

Boxes inside this box

You can pack smaller standard boxes inside this box. The table shows the sizes that use the most space.

Smaller boxHow many fitSpace used
20 × 12 × 10 in2100%
12 × 10 × 10 in4100%
10 × 10 × 6 in8100%
12 × 10 × 4 in10100%

Boxes that hold this box

To ship this box inside another box, use a box that gives at least 1/2 in of space on each side. Fill the space with padding.

Larger boxSpace for paddingPart of the larger box
24 × 24 × 16 in4,416 in³48%
24 × 24 × 18 in5,568 in³54%
22 × 22 × 22 in5,848 in³55%
FAQ

20x20x12 box questions

How many cubic feet is a 20x20x12 box?
20 × 20 × 12 = 4,800 in³. One cubic foot is 1,728 in³. So the box holds 2.778 cubic feet. This is 78.7 liters or 20.78 US gallons.
What is the dimensional weight of a 20x20x12 box?
FedEx, UPS Daily Rates and DHL Express divide 4,800 in³ by 139. They round up to 35 lb. UPS Retail Rates divide by 166, which gives 29 lb. USPS uses 35 lb, because the box is larger than 1 cubic foot. You pay for the larger value: the actual weight or the DIM weight.
What is the length plus girth of a 20x20x12 box?
The length is the longest side, 20 in. The girth is 2 × (20 + 12) = 64 in. Length plus girth is 84 in. This is within the USPS limit of 108 in.
What is the outside size of a 20x20x12 box?
Box makers usually give the inside size. A C-flute box with a 3/16 in wall is about 20 3/8 × 20 3/8 × 12 3/4 in on the outside. Carriers round this up to 21 × 21 × 13 in. The DIM weight is then 42 lb at 139.
Does a 20x20x12 box get oversize or Additional Handling fees?
Not for its size. The box is below all UPS and FedEx Additional Handling size limits. Contents that weigh more than 50 lb still cause Additional Handling.
How many 20x20x12 boxes fit on a pallet?
The outside of the box is about 20 3/8 × 20 3/8 × 12 3/4 in in C-flute board. On a 48 × 40 in pallet, one layer holds 2 boxes with the 12 3/4 in side up. 4 layers fit in a 60 in stack. This gives 8 boxes.
How many 20x20x12 boxes fit in a 40 ft container?
About 644 boxes, if all boxes point the same way and there are no pallets. This uses the outside size in C-flute board. Real loads hold fewer boxes.
What Amazon FBA size tier is a 20x20x12 box?
At the lowest weight, the box is in the Small Bulky tier. Amazon uses the larger of the unit weight and the DIM weight (34.53 lb). Heavier contents can move the box to a higher tier.