48 × 12 × 12 box
volume, size & shipping weight

A 48 × 12 × 12 in box holds 6,912 cubic inches. This is 4 cubic feet, or 113.3 liters. In metric units, the box is 121.9 × 30.5 × 30.5 cm. This is a long box. The length is 4 times the width.

Cubic feet4 ft³
Cubic inches6,912 in³
Liters113.3 L
US gallons29.92 gal
Cubic meters0.1133 m³
48 in12 in12 in
Drawn to scale · surface area 2,592 in² · space diagonal 50.9 in
Drawing

Dimensions of a 48x12x12 box

Figure 1 shows the box from the front, the top and the side, to scale. The front view shows the 48 in length and the 12 in height. The top view adds the 12 in width.

Front, top and side views of a 48 by 12 by 12 inch box, drawn to scaleTOPFRONTSIDELength 48 in (121.9 cm)Width 12 in12 in12 in
Figure 1. Front, top and side views of the 48 × 12 × 12 in box. All dimensions are inside dimensions.
DimensionInchesCentimetersMillimeters
Length48 in121.9 cm1,219 mm
Width12 in30.5 cm305 mm
Height12 in30.5 cm305 mm
PropertyValueUse
Volume6,912 in³ · 4 ft³The space inside the box.
Surface area2,592 in² · 18 ft²The board area of the six faces, without flaps or overlap.
Largest face576 in² (top and bottom)Put a label or a packing list on this face.
Space diagonal50.9 inThe longest straight item that fits, from one corner to the opposite corner.

NOTE: Box makers usually give the inside size. Carriers measure the outside: about 48 3/8 × 12 3/8 × 12 3/4 in for this box in C-flute board.

Dimensional weight

Dimensional weight of a 48x12x12 box

Carriers bill the larger of two weights: the actual weight and the dimensional (DIM) weight. To find the DIM weight, multiply the three sides. Then divide by the carrier divisor. Round the result up to the next pound.

For this box: 6,912 in³ ÷ 139 = 49.73 → 50 lb at FedEx, UPS Daily Rates and DHL Express. 6,912 in³ ÷ 166 = 41.64 → 42 lb at UPS Retail Rates. USPS uses DIM weight for this box, because the box is larger than 1 cubic foot (1,728 in³). The USPS DIM weight is 50 lb.

Bar chart of the dimensional weight of this box at each carrierFedEx50 lbUPS Daily Rates50 lbUPS Retail Rates42 lbUSPS50 lbDHL Express50 lbIf the packed box weighs more than 50 lb, FedEx and UPS bill the actual weight.
Figure 2. Dimensional weight of this box at each US carrier.
Carrier and ratesDivisorDIM weightBilled at leastWorking
FedEx (US)139 in³/lb50 lb50 lb6,912 ÷ 139 = 49.73
UPS Daily Rates139 in³/lb50 lb50 lbAccount rates
UPS Retail Rates166 in³/lb42 lb42 lbStore and counter rates: 6,912 ÷ 166 = 41.64
USPS Priority Mail and Ground Advantage139 in³/lb50 lb50 lb6,912 in³ is more than 1,728 in³
DHL Express (from the US)139 in³/lb50 lb50 lbWhole pounds
International, rated in kg5,000 cm³/kg24 kg24 kg122 × 31 × 31 cm ÷ 5,000

“Billed at least” includes a minimum billable weight that the size causes.

Rules verified 22 Sep 2026 · the official sources are listed at the top of this page.

Size limits & surcharges

Size limits for 48 × 12 × 12 in

Carriers measure the length and the girth. The length is the longest side. The girth is the distance around the box at its middle: 2 × (width + height).

For this box, the length is 48 in and the girth is 48 in. Length plus girth is 96 in.

Drawing of the box with the girth measured around its middleLength (longest side) = 48 inGirth = 2 × (12 + 12) = 48 in
Figure 3. Measure the girth around the middle of the box, at a right angle to the length.
Scale of length plus girth from 0 to 180 inches with carrier limits020406080120140160180105 in: Additional Handling108 in: USPS limit130 in: Large Package165 in: UPS/FedEx maxThis box: 96 in
Figure 4. Length plus girth of this box against the carrier limits.
  • UPS and FedEx Additional Handling (size)Does not apply. Longest side: 48 in (limit 48 in). Second-longest side: 12 in (limit 30 in). Length plus girth: 96 in (limit 105 in). Volume: 6,912 in³ (limit 10,368 in³). The rule applies only above a limit.
  • UPS Large Package and FedEx OversizeDoes not apply. Length plus girth: 96 in (limit 130 in). Volume: 6,912 in³ (limit 17,280 in³). Longest side: 48 in (limit 96 in).
  • UPS and FedEx maximum sizeThe box is within the maximum: 108 in length and 165 in length plus girth.
  • USPS size limitLength plus girth (96 in) is within the USPS limit of 108 in.
  • USPS nonstandard feesApply. The longest side (48 in) is more than 30 in. The volume (6,912 in³) is more than 3,456 in³.
  • USPS Cubic pricing (commercial)Not available. The longest side (48 in) is more than 22 in. The volume (4 ft³) is more than 1 ft³. Cubic calculator →
  • DHL Express Oversize PieceApplies ($30 for each piece). Longest side: 48 in (limit 40 in). Second-longest side: 12 in (limit 32 in).

NOTE: These checks are for size only. Weight rules are separate.

Rules verified 22 Sep 2026 · the official sources are listed at the top of this page.

Measuring

How to measure a 48x12x12 box

Do these steps to get the size that carriers use for this box.

  1. Close all the flaps. Put the box on a flat surface.
  2. Measure the longest side. The inside length is 48 in.
  3. Measure the shorter side of the bottom. The inside width is 12 in.
  4. Measure from the bottom to the top. The inside height is 12 in.
  5. Measure the outside of the box. With a C-flute wall, you get about 48 3/8 × 12 3/8 × 12 3/4 in.
  6. Round each dimension up to the next whole inch. You get 49 × 13 × 13 in.
  7. Multiply the three dimensions: 8,281 in³. Divide by 139. The DIM weight is 60 lb.

Inside size and outside size

The walls make the outside larger than the inside. A 3/16 in C-flute wall adds about 3/8 in to the length (48 → 48 3/8 in) and the width (12 → 12 3/8 in). The flaps make two layers at the top and the bottom. So the height grows by about 3/4 in (12 → 12 3/4 in).

Cross-section of the box showing inside and outside sizeInside: 48 × 12 inOutside length about 48 3/8 inTop flaps: 2 layersOutside height about 12 3/4 inSide wall: 1 layerBottom flaps: 2 layersC-flute, 3/16 in wall (typical). Wall thickness is not drawn to scale.
Figure 5. Inside and outside size of the box, seen from the front.
BoardWallOutside size (about)Carrier sizeDIM ÷139
B-flute1/8 in48 1/4 × 12 1/4 × 12 1/2 in49 × 13 × 13 in60 lb
C-flute3/16 in48 3/8 × 12 3/8 × 12 3/4 in49 × 13 × 13 in60 lb
BC double wall1/4 in48 1/2 × 12 1/2 × 13 in49 × 13 × 13 in60 lb

CAUTION: With a C-flute wall, carriers measure about 49 × 13 × 13 in. The DIM weight goes up from 50 lb to 60 lb. Use the outside size to estimate the shipping cost.

NOTE: These wall thicknesses are typical. Measure your box if the size is important.

Packaging

Make the box one inch smaller

One inch less on one side can lower the DIM weight. The best change is the width: 12 → 11 in. This lowers the FedEx and UPS DIM weight from 50 lb to 46 lb.

Changein³DIM ÷139DecreaseUPS Retail ÷166USPS
Length 48 → 47 in6,76849 lb−1 lb41 lb49 lb
Width 12 → 11 in6,33646 lb−4 lb39 lb46 lb
Height 12 → 11 in6,33646 lb−4 lb39 lb46 lb
Box blank

Flat blank for a 48x12x12 box

A regular slotted container (FEFCO 0201) is cut from one flat blank. For this box, the blank is about 121 3/4 × 24 3/8 in, or 20.61 ft² of board. The four side panels are 48 1/8, 12 1/8, 48 1/8 and 12 1/8 in wide and 12 1/4 in high. Each of the eight flaps is 6 1/16 in high, half of the box width.

Flat box blank for a regular slotted container, with panels and flapsLengthWidthLengthWidthBlank width 121 3/4 in24 3/8 in
Figure 6. Flat blank to scale. Solid lines are cuts. Dashed lines are folds.

NOTE: The drawing adds 1/8 in at each fold and uses a 1 1/4 in glue flap. Box makers can use other allowances.

Make a printable template for this box →

Pallet

On a 48 × 40 in pallet

Pallets hold boxes by their outside size: about 48 3/8 × 12 3/8 × 12 3/4 in in C-flute board. One layer holds 0 boxes (0 × 3), with the 12 3/4 in side up. 4 layers fit in a 60 in stack. The pallet holds 0 boxes, 0 ft³ in total. The layer covers 0% of the pallet top.

Pallet diagram: 0 boxes per layer and 4 layersTop view: one layer48 in40 inSide view: stack on the pallet60 in limit4 layers of 12.75 in
Figure 7. One layer from the top, and the full stack from the side.

NOTE: This is a simple column stack with the 12 3/4 in side up and no overhang. A mixed pattern can hold more boxes.

Try mixed patterns, other pallets and other heights →

In a shipping container

Containers hold boxes by their outside size. In C-flute board, this box is about 48 3/8 × 12 3/8 × 12 3/4 in outside. The table gives how many boxes fit with no pallets.

ContainerInside sizeBoxesSpace used
20 ft dry container5.9 × 2.35 × 2.39 m19674%
40 ft dry container12.03 × 2.35 × 2.4 m44181%
40 ft high cube12.03 × 2.35 × 2.7 m53287%

NOTE: All boxes point the same way in one grid, and there is no space for the doors. Real loads hold fewer boxes. Container sizes are nominal Hapag-Lloyd values.

Plan a mixed load in 3D, with turned boxes and loading steps →

Amazon FBA

Size tier

At the lowest weight, this box is in the Large Bulky tier. It is not in the Small Bulky tier. The longest side (48 in) is more than 37 in. Amazon uses the larger of the unit weight and the DIM weight (49.73 lb).

Rules verified 22 Sep 2026 · sources: Amazon Seller Central — Product size tiers

Heavier contents can move the box to a higher tier. Check with the weight of your product. Refer to the FBA dimensional weight guide for the 2026 fees.

USPS Flat Rate

Compare with USPS Flat Rate boxes

This box does not fit in a USPS Flat Rate box. The Large Flat Rate Box is 12 × 11 3/4 × 5 1/2 in inside. The Medium Flat Rate Box 2 is 13 5/8 × 11 7/8 × 3 3/8 in inside.

Top views to scale of this box and the USPS Flat Rate boxesThis box48 × 12 inSmall FRB8 5/8 × 5 3/8 inMedium FRB 111 × 8 1/2 inMedium FRB 213 5/8 × 11 7/8 inLarge FRB12 × 11 3/4 in
Figure 8. Top views to scale. The USPS boxes show their inside size.

Sizes of all carrier boxes: USPS · UPS · FedEx · Cheapest way to ship this box

Boxes inside this box

You can pack smaller standard boxes inside this box. The table shows the sizes that use the most space.

Smaller boxHow many fitSpace used
24 × 12 × 12 in2100%
16 × 12 × 12 in3100%
12 × 12 × 12 in4100%
24 × 12 × 6 in4100%

Boxes that hold this box

No larger standard box on this site gives 1/2 in of space on each side of this box.

FAQ

48x12x12 box questions

How many cubic feet is a 48x12x12 box?
48 × 12 × 12 = 6,912 in³. One cubic foot is 1,728 in³. So the box holds 4 cubic feet. This is 113.3 liters or 29.92 US gallons.
What is the dimensional weight of a 48x12x12 box?
FedEx, UPS Daily Rates and DHL Express divide 6,912 in³ by 139. They round up to 50 lb. UPS Retail Rates divide by 166, which gives 42 lb. USPS uses 50 lb, because the box is larger than 1 cubic foot. You pay for the larger value: the actual weight or the DIM weight.
What is the length plus girth of a 48x12x12 box?
The length is the longest side, 48 in. The girth is 2 × (12 + 12) = 48 in. Length plus girth is 96 in. This is within the USPS limit of 108 in.
What is the outside size of a 48x12x12 box?
Box makers usually give the inside size. A C-flute box with a 3/16 in wall is about 48 3/8 × 12 3/8 × 12 3/4 in on the outside. Carriers round this up to 49 × 13 × 13 in. The DIM weight is then 60 lb at 139.
Does a 48x12x12 box get oversize or Additional Handling fees?
Not for its size. The box is below all UPS and FedEx Additional Handling size limits. Contents that weigh more than 50 lb still cause Additional Handling.
How many 48x12x12 boxes fit on a pallet?
The outside of the box is about 48 3/8 × 12 3/8 × 12 3/4 in in C-flute board. On a 48 × 40 in pallet, one layer holds 0 boxes with the 12 3/4 in side up. 4 layers fit in a 60 in stack. This gives 0 boxes.
How many 48x12x12 boxes fit in a 40 ft container?
About 441 boxes, if all boxes point the same way and there are no pallets. This uses the outside size in C-flute board. Real loads hold fewer boxes.
What Amazon FBA size tier is a 48x12x12 box?
At the lowest weight, the box is in the Large Bulky tier. Amazon uses the larger of the unit weight and the DIM weight (49.73 lb). Heavier contents can move the box to a higher tier.